Installing Your Cordless Telephone
Selecting the Installation Location
Select a location for the XC630/633 to avoid excessive heat or humidity (as in a kitchen or bathroom). The Base Unit can be placed on a desk or tabletop near a standard 230/240Y AC outlet and standard telephone line socket, or mounted on a wall. Keep the Base Unit and Handset away from sources of electrical noise, (motors, fluorescent lighting). Be sure there is sufficient space to safely extend the Base Unit antenna fully.
Connecting the Telephone Line
Plugthe telephone line chord from the Base Unit into a standard telephone socket.
~If you do not have a telephone socket, contact Telecom for
further information.
NOTE
CAUTION:
. Never install telephone wiring during a lightning storm.
. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.
. Use caution when installing or modifying telephone lines.
~
NOTE
The base unit must be connected to a working electrical outlet. Calls cannot be made from the handset if the base unit is unplugged or switched off, or if the electrical power is interrupted.
14
