Installing the Rechargeable Battery Packs into the Handsets
Each handset is powered by a rechargeable battery pack. Once installed, the battery charges automatically when the handset is placed in the base or charging cradle (XS1455+1 only).
To install the rechargeable battery pack:
1)Press down on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove.
2)Plug the battery pack connector (red & black wires) into the small jack inside the battery compartment. (The connector notches fit into the grooves of the jack only
3)Make sure you have a good connection by slightly pulling on the battery wires. If the connection is secure, the battery jack will remain in place.
4)Place the battery case cover back in the handset by sliding it upwards until it clicks into place.
Note: Use only the Uniden
XS1455+1 OM.indd 8 | 24/6/08 1:35:56 PM |