REMOVING FRONT SCREEN

1)Remove the two(2) screws and lift the front screen slightly up. (Fig. 7A) Then tilt the bottom of the screen inward and downward. (Fig. 7B) 2) Lean the top of the screen toward you slightly (Fig. 7B) and then proceed to carefully bring the screen straight back (Fig. 7C). NOTE: To reinstall the front screen, reverse steps 1 & 2.

FIG 7A

FIG 7B

FIG 7C

LOG ASSEMBLY

LOG POSITIONING

Donothandletheselogswithyourbarehands! Alwayswearglovestopreventskinirritationfromceramicfibers. After handling logs, wash your hands gently with soap and water to remove any traces of fibers.

PROPER INSTALLATION SEQUENCE:

WARNING: Failure to position the parts in accordance with these dia- grams or failure to use only parts specificallyapprovedwiththisheater may result in property damage or personalinjury.

FIGURE 8. Log Set Assembly

WARNING

Thepositioningofthelogsiscriticaltothesafeandcleanoperationofthisheater. Sooting and other problems may result if the logs are not properly and firmly situatedintheappliance.Neveraddadditionallogsorembellishmentssuchas pinecones,vermiculiteorrockwooltotheheater.

11

Page 11
Image 11
United States Stove B9945L manual Removing Front Screen, LOG Assembly, LOG Positioning, Proper Installation Sequence