Atlas OCAP M1056L.fm Page 25 Friday, December 22, 2006 6:10 PM |
2.Enter 9 8 0. The
blinks twice, pauses, and blinks twice again to confirm that all custom programming is cleared.
ACTIVATING BACKLIGHTING (OPTIONAL)
On some models of your Atlas OCAP
1.Press SETUP twice within one second.
Backlighting is turned on.
To disable backlighting, perform the following step:
1.Press SETUP twice within one second.
Backlighting is turned off.
TROUBLESHOOTING
PROBLEM: Device key does not blink when you press a key.
SOLUTION: Replace the batteries with two (2) new AA batteries (see “Installing Batteries” on page 9).
PROBLEM: Device key blinks when you press a key, but home entertainment device does not respond.
SOLUTION: Make sure you are aiming the remote control at your home entertainment device and that you are within 15 feet of the device you are trying to control.
PROBLEM: The remote control does not control home entertainment devices or commands are not performing properly.
SOLUTION: Try all listed codes for the device brand being set up. Make sure all devices can be operated with an infrared remote control.
PROBLEM: TV/VCR Combo does not respond properly.
SOLUTION: Use the VCR codes for your brand. Some combo units may require both a TV code and a VCR code for full operation (see page 11).
PROBLEM: No volume on a second TV.
SOLUTION: Follow instructions under “Changing Volume Lock” on page 18.
www.urcsupport.com/atlasocap
25
