Atlas OCAP M1056.fm Page 13 Wednesday, April 30, 2008 2:52 PM |
4.Aim the remote control at the TV and press
PWR once.
5.Press and release the CH+ key continuously,
then stop when the TV turns off.
NOTE: In the search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first.
6.Press PWR. The TV should turn on, then press
SETUP to lock in the code.
NOTE: If the TV does not turn on during step 6, then slowly press and release CH- to go back through the codes, then press SETUP when the TV turns on.
7.To search for the codes of your other devices, repeat steps 1 through 6, but substitute the appropriate key (e.g., VCR, DVD, AUD, or CBL) for the device you are searching for.
www.urcsupport.com/atlasocap
13
