Universal Electronics OCAP 5 manual Using the Master Power Key, Clearing the Master Power Key

Atlas OCAP M1056.fm Page 20 Wednesday, April 30, 2008 2:52 PM

2.Enter 9 9 5. The last-selected device key blinks twice.

3.Press PWR once.

4.For the first device you want in the power on sequence, press a device key (e.g., CBL) once.

Then press PWR once. For the second device in the power sequence, press its key once (e.g, TV). Then press PWR.

5.Repeat step 4 up to four more times to add the second, third, fourth, and fifth device, as desired.

6.To save the settings and exit the program:

a.Press CBL once.

b.Press and hold SETUP until the CBL key blinks twice.

Using the Master Power Key

1.After programming, point the remote control

at the devices. Press CBL once.

2.Press PWR once to sequentially turn the

programmed home entertainment devices on or off.

You will see the devices turn on or off according to the programmed sequence.

Clearing the Master Power Key

1.On the remote control, press and hold SETUP

until the last-selected device key blinks twice.

2.Enter 9 9 5. The last-selected device key blinks twice.

3.Press and release PWR.

www.urcsupport.com/atlasocap

20