Universal Remote Control DMS-AV TPS2000 Video Processing

Page 26

Control Output Triggers / Amp Enable

The Control Out / Amp Enable outputs are standard 3.5 mm (mono mini) jack

connections used for triggering such pieces as ampliﬁers, screens, relays, etc.

The output is a 100 mA 12 VDC signal. The voltage trigger outputs are active

when the DMS-AV is selected to a speciﬁc input. The trigger input for each

control output is set in the on-screen display, or within the URC Accelerator

application. Shown below is control Trigger 1 and Trigger 2 connection to the

trigger input on an ampliﬁer.

Reset

Pressing the Reset button will return the DMS-AV to its factory default state.

Video Processing

Detail Enhancement

Detail enhancement brings out the ﬁne detail in scenes and is important for SD

and HD material. For example, it’s possible to see blades of grass, small details

on jackets, and wrinkles on faces. When combined with Noise Reduction and

Advanced Scaling, DMS-AV Detail Enhancement can make regular DVDs

approach the quality of high-deﬁnition DVDs.

Mosquito Noise Reduction

Satellite and cable providers, as well as DVR recorders, compress the video

signal to get the maximum content into the smallest space. The DMS-AV

delivers high-quality Mosquito Noise Reduction to remove the noise and artifacts

caused by this compression.

DMS-AV HOME THEATER AMPLIFIER

Control output 1 connection to an ampliﬁer

Contents

Main DMS-AV Owners Manual 2012 Universal Remote Control, Inc. Page Page Page IMPORTANT SAFETY INSTRUCTIONS Cautions on Installation Page Page Page FCC INFORMATION Introduction / Overview DMS-AV Front Panel DMS-AV Rear Panel Page Page Quick Start Considerations Page Page Page 19 DMS-A V H OME THEATER A Video Connections Connection Overview Audio Connections Video Inputs - Hardware Connections Video Input Connection HDMI Video Input Connection - Component Video Video Input Connection - Composite Video Video Outputs - Hardware Connections Video Output Connection - HDMI Video Output Connection - Component Video Audio Inputs - Hardware Connections Audio Input Connection HDMI Audio Input Connection - Optical Digital Audio Input Connection - Coax Digital Audio Input Connection - Stereo Analog Audio Output - Hardware Connections Audio Output Connection Unbalanced Audio Output Connection Subwoofer(s) Audio Output Connection - Optical Digital Record Audio Output Connection - Analog Record Conguration and Control - Hardware Connections Ethernet Communication - Connection Instructions Infrared Input Control Output Triggers / Amp Enable Reset Video Processing Detail Enhancement Mosquito Noise Reduction Edge Enhancement HDMI Audio Output CEC Control Auto A/V Sync Video PReP Video Test Patterns Frame Geometry Bright/Contrast Checkerboard Vertical Lines Horizontal Lines Judder Color 8 Bars 75 Audio Modes and Speaker Selections Audio/Surround Mode Usage On Screen Display (OSD) Format Momentary OSD Software Setup - URC Accelerator DMS-AV System Settings Audio Speaker Size/Speaker Crossover Front Speakers Center Speaker Surround Speakers Surround Back Speakers Front Height Speakers Subwoofer(s) Speaker Distance Channel Level Speaker Crossover (X-Over) LFE (Dolby/DTS) Height Gain Dolby Pro Logic II Music Setup Night Mode Page Dolby Digital Dolby Digital EX Dolby Digital Plus Dolby True HD Dolby Pro Logic IIz Page A.L.C (Auto Volume Level Control) Selecting the Surround mode Cancelling the surround mode for stereo operation Tone Setting Automated Speaker Setup Input Settings Input Rename Digital Audio Assign Analog Audio Assign Video Scaling A/V Sync DC Trigger 1 DC Trigger 2 Accessing Streaming Audio Sources with the DMS-AV Updating DMS-AV Firmware DMS-AV Specifications General Information Power Amplifier DSP Processing Video Processing Video Input/Output General Audio Features USA Limited Warranty Statement