Manuals / Brands / Home Audio / Home Theater System / Universal Remote Control / Home Audio / Home Theater System

Universal Remote Control DMS-AV TPS2000 Audio Output - Hardware Connections

1 50

Download 50 pages, 14.7 Mb

Page 23

Audio Output - Hardware Connections

Your DMS-AV receiver has both

unbalanced line level RCA surround

output (for use with other external

ampliﬁers) and speaker binding posts

(for use with the 125 watt internal

ampliﬁers). These will connect

directly to a speaker or an ampliﬁer.

When connecting audio cables to the

ampliﬁer, be sure to match the

labeled output channels to the

position of the speaker in the room.

Audio Output Connection – Unbalanced

The DMS-AV supports 7.1 RCA surround outputs. The preampliﬁer outputs

can be conﬁgured to use either Surround Back speakers or Front Height

speakers. Typical usage of these outputs is for use with other external

ampliﬁers. These outputs may be used to connect external ampliﬁers and/or

subwoofer(s) to the DMS-AV. Be sure to match the appropriate preamp

output to the speakers location in the room. For example, connect the

Center Channel output to the center speaker ampliﬁer channel. For use in a

ﬁve channel audio system, do not connect the Surround Back or Front

Height audio channels. For use in a six channel audio system, connect the

sixth channel to the Surround Back Left channel. Shown are the DMS-AV

unbalanced outputs connected using standard RCA cables to the

unbalanced inputs on an external ampliﬁer. The Subwoofer output is used

as a line source to a powered subwoofer.

Audio Output Connection – Speakers

The DMS-AV powers seven discrete speaker channels. Be sure to match the

appropriate speaker output to the speakers location in the room. For

example, connect the Center Channel output the center speaker ampliﬁer

channel. If a ﬁve channel audio system is desired, do not connect the

Surround Back audio channels. If a six channel audio system is desired,

connect the sixth channel to the Surround Back Left channel.

DMS-AV HOME THEATER AMPLIFIER

Speaker outputs connection to speakers

Analog audio unbalanced signal outputs connection to ampliﬁer

Contents

Main DMS-AV Owners Manual 2012 Universal Remote Control, Inc. Page Page Page IMPORTANT SAFETY INSTRUCTIONS Cautions on Installation Page Page Page FCC INFORMATION Introduction / Overview DMS-AV Front Panel DMS-AV Rear Panel Page Page Quick Start Considerations Page Page Page 19 DMS-A V H OME THEATER A Video Connections Connection Overview Audio Connections Video Inputs - Hardware Connections Video Input Connection HDMI Video Input Connection - Component Video Video Input Connection - Composite Video Video Outputs - Hardware Connections Video Output Connection - HDMI Video Output Connection - Component Video Audio Inputs - Hardware Connections Audio Input Connection HDMI Audio Input Connection - Optical Digital Audio Input Connection - Coax Digital Audio Input Connection - Stereo Analog Audio Output - Hardware Connections Audio Output Connection Unbalanced Audio Output Connection Subwoofer(s) Audio Output Connection - Optical Digital Record Audio Output Connection - Analog Record Conguration and Control - Hardware Connections Ethernet Communication - Connection Instructions Infrared Input Control Output Triggers / Amp Enable Reset Video Processing Detail Enhancement Mosquito Noise Reduction Edge Enhancement HDMI Audio Output CEC Control Auto A/V Sync Video PReP Video Test Patterns Frame Geometry Bright/Contrast Checkerboard Vertical Lines Horizontal Lines Judder Color 8 Bars 75 Audio Modes and Speaker Selections Audio/Surround Mode Usage On Screen Display (OSD) Format Momentary OSD Software Setup - URC Accelerator DMS-AV System Settings Audio Speaker Size/Speaker Crossover Front Speakers Center Speaker Surround Speakers Surround Back Speakers Front Height Speakers Subwoofer(s) Speaker Distance Channel Level Speaker Crossover (X-Over) LFE (Dolby/DTS) Height Gain Dolby Pro Logic II Music Setup Night Mode Page Dolby Digital Dolby Digital EX Dolby Digital Plus Dolby True HD Dolby Pro Logic IIz Page A.L.C (Auto Volume Level Control) Selecting the Surround mode Cancelling the surround mode for stereo operation Tone Setting Automated Speaker Setup Input Settings Input Rename Digital Audio Assign Analog Audio Assign Video Scaling A/V Sync DC Trigger 1 DC Trigger 2 Accessing Streaming Audio Sources with the DMS-AV Updating DMS-AV Firmware DMS-AV Specifications General Information Power Amplifier DSP Processing Video Processing Video Input/Output General Audio Features USA Limited Warranty Statement