Universal Remote Control M-855 user manual Features, Hardware Monitoring, Shield Connector

¡ Low profile heat sink with fan ¡ I/O Shield

Note: M-855 OEM versions with non-standard configurations may vary in function or contents according to request.

CAUTION: This board must be protected from static discharge and physical

!static-free workstation. Use the anti-static bag shipped with the product to handle the board. Wear a wrist strap grounded through one of the system's ESD Ground jacks while servicing system components.

1.2Features

•Intel® Pentium® M / Celeron® M processor

•Intel® 855GME + ICH4 AGPset

•Support 2GB DDR266/333 SDRAM (max.) memory

•Front Side Bus Frequency: 400/533MHz

•Chipset integrated graphic & LVDS function

•Single 10/100/1000 Mbps Gigabit Ethernet using Intel® 82541 chip

•Software programmable watchdog timer

•Hardware Monitoring

•AC97 Audio Lin-outpin-headershock. Never remove any of the socketed parts except at a

Hardware Monitoring

Hardware monitoring allows the user to monitor various aspects of system operations and status (including the CPU temperature, voltage, and fan RPM).

I/O Shield Connector

The SBC is equipped with an I/O bracket. Please use the appropriate I/O shield.

Introduction • 3