Universal Remote Control MX-5000 manual Connecting the Battery Pack, Using the Charging Base

MX-5000 TWO WAY TOUCH SCREEN

Connecting the Battery Pack

Unlock the rear cover by pressing down on the spring lock at the top of the cover.

Remove the cover. For shipment from the factory, the battery is left out of the MX-5000. Place the battery into the battery compart- ment, making sure you align the contacts on the battery to the con- tacts on the MX-5000. The battery will snap into place when aligned properly.

Replace the cover and snap it into place.

Using the Charging Base

Plug the 6V DC adapter into a power outlet and into the back of the charging base.

Gently place the MX-5000 into the cradle of the charging base. It automatically aligns itself to the contacts on the charging base.

The Status light should imme- diately light. Red indicates that it is charging. Blue shows that it is fully charged. There is no harm in leaving the MX- 5000 on its charging base

whenever it is not in use.

Red indicates charging, Blue that the remote is fully charged.

Two Way via Wi-Fi

To use the MX-5000 with any two way companion product, the MX-5000 must be configured by your installer to be part of a LAN (local area network) via a Wi-Fi b/g access point or router. This is not user configurable. If you have any questions, consult with your custom installer.

Page 2