Universal Remote Control MX-5000 manual Displaying the Settings Screen, Sleep Settings, Network

MX-5000 TWO WAY TOUCH SCREEN

Displaying the Settings Screen

You can adjust the set- tings of the MX-5000 whenever you like by pressing and holding the main + OK button for three seconds. When you do, the screen will change to the Settings screen. If you do not press any button on the Settings screen within 30 seconds, the MX-5000 will time out and auto- matically return to nor- mal operation.

Page 2 of the Settings

Screen

Page buttons reveal the rest of the settings.

There are two pages of Settings screen. To access the other page, press either of the Page buttons.

Sleep Settings

Wi-Fi and Backlighting can be separately adjust- ed to conserve battery life. Note that if Wi-Fi is disconnected, the MX-5000 will take an addition- al 4-10 seconds to connect to the network when a two way device is started.

Network

WARNING! Only use this button when instructed to by Technical Support. The Network screen displays network information about your MX6000 and the wireless network it is connected to. Do not make any changes on this screen!

Page 9