twigs,andbitsofpaper.Donotvacu- | der _ | when vacuuming to avoid | |
um stones, gravel, metal, broken | lossof control. |
| |
glass,etc.,toavoidseveredama_.toe | • Check air intake openings, elbow | ||
theimpellerToavoidthepossibilityof. | tube, and vacuumtubes frequently,al- | ||
electricalshock,donotattempttovac- | ways with the | unit stopped and the | |
uumwateror otherli.q.wids_.- | power | source | disconnected. Keep |
• Never run the unit without the proper | vantsand tubesfree fromdebriswhlch | ||
equipment attached. When used as a | can accumulate and restrictproper air | ||
vacuum, always install vacuum tubes | flow. Do not use with any opening | ||
and collection bag assembly. Make | blocked, .Keepfree from dust, lint, hmr | ||
sure the collection bag assembly is | and anyth,ngthat may reduce air flow. | ||
completely zipped when unit is run- | STANDARDS |
| |
ning to avoid flying debds. Use only | This productis listed by Underwriters | ||
recommended attachments. | Laboratorias, Inc. in accordance with | ||
•Avoid situations which could set the UL Standard 1017.
collection bag on rire. Do not vacuum If situationsoccur which are not cov- discardedmatches, cigars, cigarettes, ered in th_ manual, use cam and or ash from fireplaces, barbecue pits,
brush piles, etc. To avoid spreading good judgement. If you need assis-
tire, do not use blower near leaf or | tance, contact your Sears Service |
brush rims, rimplaces, barbecue pits, | Center or call |
ashtrays, etc. | to follow all Safety Rules and Precau- |
•Always use the collection bag shoul- tions can result in sedous injury.
SAVE THESE INSTRUCTIONS
CARTON CONTENTS Model 358.799370 Blower
Blower Tube
Cord Lock
Examine parts for damage. Do not use damaged parts.
NOTE: If you need assistance or find
that parts are missing or damaged, call
ASSEMBLY
WARNING: If received assembled,
. repea_,all steps to ensure your unit is
ASSEMBLY INSTRUCTIONS FOR USING YOUR UNIT AS A BLOWER
NOTE: ,Assembly instructions for using your unR as a vacuum follow this sec- tion.
ATTACHING THE BLOWER TUBE AND NOZZLE
If you have already assembled your unitfor use as a vacuum, remove the vacuum tubes and the collection bag.
•Insertthe blowertube intothe blower outieL
•Twist the blower tube cJockwiseuntil it is firmlyseated in the blower outieL
Make sure the nozzle pointsupward.
BlowerOutlet/
BlowerTube
