Univex owner manual iv.Repeat this process for the other AM-77

Note: This function requires at least 2 x AM-77 synchronised pre-main amplifiers.

i. Power OFF via the ‘POWER’ (R12) switch at the rear of both AM-77s.

ii.Using a small flat blade screwdriver, move the ‘MODE’ switch (R5) to the right to select ‘MM’.

iii.Using a small flat blade screwdriver, move the ‘INT/POWER AMP’ switch (R4) to the left to select ‘POWER AMP’.

iv.Repeat this process for the other AM-77.

v.Power ON both AM-77s via the respective ‘POWER’ switch (R12).

51