i. Power OFF via the ‘POWER’ (R12) switch at the rear of the AM-77.

ii.Connect the desired separate pre-amplifier to the AM-77 via the Balanced or RCA female connector of Input 1 (R6).

iii.Using a small flat blade screwdriver, move the ‘MODE’ switch (R5) to the centre to select ‘L R’.

iv.Using a small flat blade screwdriver, move the ‘INT/POWER AMP’ switch (R4) to the left to select ‘POWER AMP’.

v.Power the AM-77 back on via the ‘POWER’ switch (R12).

47

Page 47
Image 47
Univex AM-77 owner manual