RC-77 battery installation, RC-77 Remote Control

Figure 2.3 - RC-77 Remote Control

CD Processor

RC1. MENU button: to enter Advanced Features mode*.

RC2. STANDBY button: to place the AM-77 in active or standby mode.

RC3. SOURCE selection buttons: to select between the 5 different inputs.

RC4. VOLUME buttons: to adjust the volume level.

RC5. MUTE button: to Mute (temporarily turn off sound) the AM-77.

RC6. BRIGHTNESS button: to adjust brightness levels*.

RC7. OK button: to be used in Advanced Features mode*.

* Please refer to Section 3 - Advanced Features section for more details

To install the 2 x AAA batteries, using a Philips screwdriver, remove the four screws at the four corners of the rear battery compartment.

Install the 2 x AAA batteries in the correct direction according to the baseplate inside the battery compartment.

Replace the battery compartment and the four cover screws.