Vanguard Heating SBVBP(A) Pre-Installation, Freestanding, Preparation, Fireplace, Assembly

OWNER’S MANUAL

PRE-INSTALLATION	FREESTANDING
PREPARATION	FIREPLACE
Continued	ASSEMBLY
	STOVE BODY ASSEMBLY
	1. Lift off corrugated box enclosing stove
	body crating.

2. Remove all screws fastening the wood frame enclosure. Spread wood frame open and lift away from plastic-bagged stove

4"4"body. The bottom pieces of pallet wood will remain bolted to the stove body.

3. Remove plastic bag from stove body.

4. Remove back panel from stove (see Figure 6). Use an adjustable wrench or a 10 mm socket. Remove six (6) bolts and washers. Keep bolts and washers

to reattach back panel later.

Figure 4 - Clearance for Corner Installation 5. Remove all contents from inside stove cavity. Contents include:

7.Remove remaining pallet wood at- tached to bottom of stove body (see Figure 8). Use an adjustable wrench to remove bolts.

8.Fasten each leg to stove with four (4) M8 x 1.25 - 20mm bolts. Use a flat washer and lock washer with each bolt. Tighten bolts into threaded holes on stove body (see Figures 9 and 10, page

6). Use an adjustable wrench or a 12mm socket.

9.Fasten stove bottom to stove with four

(4) M6 x 1 - 25mm bolts. Use a flat washer and lock washer with each bolt. Tighten bolts into threaded holes on stove body (see Figure 9 and 11, page

6). Use an adjustable wrench or a 10mm socket.

Pallet

BoltFront Wood

26"

Front

25"

Figure 5 - Freestanding Fireplace Bottom Dimensions

(1) - Stove bottom

(4)- Legs with leg leveler bolts

(1)- Bottom door

(1)- Top grate

(1)- Hardware kit bag with fasteners

6.Carefully lay stove body on back to at- tach bottom components to stove body (see Figure 7). Rest stove on drop cloth or blanket to avoid scratching stove edges.

Bolt	Product
Back	Identification
	Label
Stove
Panel

Pallet Wood	Bottom Of
	Stove Unit

Figure 8 - Removing Pallet Wood From The Bottom of The Stove

Figure 6 - Removing Back Panel
	Top of Stove Unit
Front of		Front of
		Stove Unit
Stove		Top of
		Stove
Unit
	Pallet	Unit
Drop
	Wood
Cloth/	Bolted to
Blanket	Bottom of
	Stove
	Body
Figure 7 - Laying Down Stove On Side		Continued

105500 5