V027_Rapide XL_aw 25/10/05 4:33 pm Page 4
4 | 5 | 6 |
8
Remove solution tank cap.CAUTION: Do not overfill. You should leave
Fill the tank with pre-treatment solution.
Replace the solution tank cap. Return the solution tank to the cleaner making sure the solution tube lines up with the groove in the back of the solution tank. Firmly press the solution tube into the plug opening of the solution tank.
7 | 8 | 9 |
9
Remove the clean water tank cap and put in a safe place. Slowly fill the clean water tank with hot tap water (max 40oC) and replace the cap.
Return clean water tank by lining up the grooves of the clean water tank with the support posts on the inside of the handle. Rock clean water tank inward until it locks into place.
Attach the