V027_Rapide XL_aw 25/10/05 4:33 pm Page 7
How to operate your cleaner
1 | 2 | 3 |
14
3a
Plug the cord into an electrical socket. Step on the handle release pedal to put the cleaner into a cleaning position.
Turn main power switch, brush switch and soap switch all to the ON position.
Note: See page 10 for details on the various switch functions.
To spray cleaning solution, depress the solution release trigger (3a) and move the cleaner backward and forward. Release the trigger and push the unit back and forth in the same track to remove dirty water and solution from the carpet.
For heavily soiled areas, repeat if necessary.
How to operate your cleaner
4
15
To rinse your carpet, turn the soap switch to the OFF position. Repeat the same process (as in step 3)
Power | Brush | Soap | Result |
ON | ON | ON | Vacuum, pump, |
|
|
| brushbar and soap are |
|
|
| turned on. Used to |
|
|
| wash carpets. |
ON | ON | OFF | Vacuum, pump, |
|
|
| brushbar are turned on. |
|
|
| Used to rinse carpets. |
ON | OFF | ON | Vacuum, pump and |
|
|
| soap are turned on. |
|
|
| Used for cleaning |
|
|
| through attachments. |
ON | OFF | OFF | Vacuum and pump |
|
|
| turned on. Used for |
|
|
| rinsing through |
|
|
| attachments or dirty |
|
|
| water |
|
|
| brushbar off. |
OFF | ON/OFF ON/OFF No power to vacuum, | ||
|
|
| pump, brushbar and |
soap. The power switch must be on for any motors to function.
How to carry your cleaner
1
Grab the carrying handle on the back of the cleaner to transport from room to room.
Do not pick the cleaner up by the clean water tank handle.