CLEANING YOUR LIFETIME HEPA FILTER (CONTINUED)

3.

4.

5.

Twist filter handle to the left and

Hold filter under running water to wash.

Place filter under water to clean. Make

pull out of lid.

Ring excess water out of filter. Allow

sure filter is completely dry before

 

filter to dry for at least 24 hours.

returning to cleaner.

DIRT CONTAINER AND FILTER

NOTE: Let filter dry for at least 24 hours before placing back in cleaner.

VAX Tip:

For your convenience while your lifetime HEPA filter is drying, pick up an additional

REPLACE PLEATED FILTER

1.

REPLACE FOAM FILTER

 

 

2.

3.

3a.

filteronlineatata www.vaxusa.com.retailer near you or

Replace filter inside filter cup by aligning with tabs inside of filter cup.Twist to the right until filter locks in place.

Return filter to the dirt container lid.

Place filter lid on top of dirt container and align arrows (Diagram 3). Push down gently and twist filter cup to the right until lid is secure and snaps in place (Diagram 3a).

11

Page 12
Image 12
Vax X3 owner manual Cleaning Your Lifetime Hepa Filter, Replace Foam Filter, Return filter to the dirt container lid