ASSEMBLY
TOOL REQUIRED: PHILLIPS OR FLATHEAD SCREWDRIVER
1. | 2. | 3. |
Pull cleaning wand to the front of the cleaner and press hose into handle assembly.
4.
Insert excess cord into handle of the cleaner by pushing down into
lower handle.AVOID PINCHING CORDCAUTION:WHILE INSERTING INTO HANDLE.
5.
Align handle onto base of cleaner.
TRANSPORTING
YOUR CLEANER
1.
NOTE: Do not carry vacuum cleaner by the cleaning wand tube.This is not a carry handle.
6
Using a Phillips or Flat Head screwdriver, secure the handle by inserting the provided four screws into the back of the handle.
Connect the cleaning wand to the opening on the base and push the wand handle towards unit until it snaps into place.
Use carry handle located on dirt container lid.
