STARTING UP

1.

2.

3.

HOW TO OPERATE

Holding the power cord by the plug, pull the cord out completely. Red tag will indicate the end of the cord. Plug into the outlet.

For easier handling while vacuuming, hook the power cord onto the power cord hook.

Switch the upright vacuum cleaner on or off by pressing the on/off switch.

BRUSH VACUUMING

NOTE: The brushroll is automatically switched off when it is in the vertical upright position.

BRUSHROLL RESET

1.2.

Tilt the upright vacuum cleaner back before you start vacuuming. At the same time, use your foot to press the nozzle down onto the carpet.

Brush Vacuuming on carpeted floors:

• The brushroll is switched on or off using the brushroll on/off switch (Diagram 2). Switch brushroll on for carpeted floors.

• The rotating brushroll loosens deeply embedded dirt and brings it to the surface.

Vacuuming on smooffth surfaces:

• Switch brushroll to obtain the best results when vacuuming smooth barefloor surfaces.

1.

RESET BUTTON

If something becomes lodged and brushroll shuts off, turn cleaner off and remove obstruction. Once the problem has been fixed, the vacuum cleaner can be switched back on again after approximately 2 minutes by pressing the reset button.

7

Page 8
Image 8
Vax X3 owner manual HOW to Operate, Starting UP, Brush Vacuuming Brushroll Reset