VDO Dayton CD 2327 G, CD 2537 U, CD 2217 G, CD 2737 B user manual CD Operation

Interrupting TA

If you do not wish to continue listening to a par- ticular Traffic Announcement broadcast, you can interrupt it without switching off the TA mode.

1. Short-press the TA button once, the hea-

AF

dunit will return to the previous operating mode.

Enhanced other Network (EON)

EON information allows the updating of RDS information for programme services other than the currently tuned station. By default, this EON function is enabled. To toggle the settings:

1.Navigate the SAM to select ‘TA EON’.

2.Turn the knob clockwise / anti-clockwise to toggle the modes (Off, Local or Distant).

Note: The reception of distant stations, which may be weaker due to its distance, may be bad and the audio output may be distorted as a re- sult.

Programme Type (PTY)

This function is available with FM only. It enables you to select stations by programme type. There is a coding of up to 28 pre-defined programme types – e.g. (in Europe): PTY1 News, PTY6 Drama, PTY11 Rock music.

Searching for a Programme Type

1.Long-press BANDPTY button to activate the PTY function.

2.Short-press either button or button to select the desired programme type.

3.Short-press either button or button to search for PTY stations.

PTY Activation / De-activation

To change the operation mode of the PTY, you need to change the setting in the SAM.

1.Navigate the SAM to select ‘PTY’.

2.Turn the knob clockwise / anti-clockwise to toggle the PTY setting.

Note: Setting ‘PTY’ menu item to ‘NEWS INT’ will allow PTY-NEWS to interrupt (in a similar way as TA interruption) when there is an incom- ing NEWS.

RDS Regionalization

To change the way this headunit reacts to the environmental conditions affecting the quality of the radio stations, you can change the setting in the SAM.

1.Navigate the SAM to select ‘REG-RDS’.

2.Turn the knob clockwise / anti-clockwise to toggle the REG-RDS setting.

CD OPERATION

Loading CD into the Headunit

1.If not already on, short-press the MUTEPWR button to turn on the headunit.

2.Press the REL button to flip down the front.

3.Insert the CD (label facing up) into the CD slot.

4.Close the front.

5.The display should show “CD READ” while still reading the disc.

When a disc is loaded, it will start playing auto- matically.

Note: If a CD does not automatically load, DO NOT FORCE it into the slot. This could damage the CD and the headunit.

Ejecting a CD

1.Press the REL button to flip down the front.

2.Press the EJECT button to eject the disc.

3.Remove the disc.

4.Close the front.

Playing a CD-R or CD-RW

Depending on the type of CD-R / CD-RW CD, surface condition of the disc, as well as the per- formance and condition of the CD writer, certain CD-R / CD-RW CD may not operate normally on this headunit.

Playing a “Copy-Protected” non- conforming audio CD

Due to the use of copy protection schemes of some audio CDs, which are non-conforming to international audio CDs standards (Red Book), these types of copy-protected disc(s) may not play on this headunit.

In the case of multi-session disc with such schemes, you may try to disable the multi-ses- sion ability by changing the SAM setting to allow reading of at least the first session.

1.Navigate the SAM to select ‘MULTI-S’.

2.Turn the knob clockwise / anti-clockwise to toggle the multi-session support.

Try playing the “copy-protected” disc again.

Note: Remember to enable the multi-session support again in the SAM after playing this disc!

20