VDO Dayton CD 2327 G, CD 2537 U, CD 2217 G, CD 2737 B user manual

.Continue programming your SWRC’s buttons to the pre-defined as much as possible with

the same steps.

8.For those buttons that you do not need, please disabled them by selecting “-DIS-

ABLE-” and press-and-hold the unwanted buttons for more than 2 seconds.

Important Note: In the case that you did not disable the unwanted SWRC buttons, due to the complexity of the programming to cater to most types of SWRC, the headunit may recognise an unwanted key-press on your SWRC as one of the valid input.

9.Continue to select “-DISABLE-” and repeat the process to disable all unwanted buttons.

10.To exit the programming mode and SAVE all settings, short-press the ASTSAM button.

11.To exit the programming mode and DISCARD

all settings, short-press the MUTEPWR button. These pre-defined functions emulate the buttons on the front panel:

Volume-

Volume+

Source

Right

Left

Up

Down

Mute

-Disable-

Please refer to the section on "FRONT PANEL AND REMOTE CONTROL" for buttons' function- alities.

24