(16) Auto ON/OFF Switch
Use this switch to select between auto-on active and auto-on inactive (constant on) operation. For maximum amplifier life, we recommend the Auto ON/OFF “Active” setting.
(17) Speaker Level Output Terminals (See Figure 5)
These connections send a crossed-over speaker-level signal to the front speakers. When connected in this fashion, your satellite speakers will be crossed over at 80 Hz. This removes the lower bass frequencies from your satellites, enabling them to do a better job reproducing high frequencies and giving your receiver’s amp more headroom (up to 50% more power).
You may also connect your satellites directly to your receiver or amplifier along with the subwoofer if you wish to bypass this crossover.
Figure 5: Speaker-Level Connection.
.w w w . v e l o d y n e . c o m
SubContractor User’s Manual
