Operation
Switching on and selecting a programme
You will hear a humming sound when the appliance is switched on, during operation or after the appliance has been switched off.
This sound does not indicate a malfunction or fault with the appliance. It happens when the water is pumped in and out.
Close the appliance door.
Switch the appliance on with the On/Off button.
The following will show in the programme and temperature display:
After a few seconds, the display will change automatically to the Steam with pressure programme .
If you want to use a different programme, press the programme button repeatedly until the programme you want shows in the display, e.g. Steam without pressure .
Altering the recommended temperature
The recommended temperature can be altered in 5 °C increments within a certain range. See Programme chart for details. Should you wish to adjust the temperature in 1 °C steps, you will need to alter the factory default setting (see "Programming").
Use the + or - temperature buttons to set the required temperature.
You can adjust the temperature at any time, even if a programme has already started.
18
