![Overheating protection](/images/new-backgrounds/65817/6581775x1.webp)
Safety features
Overheating protection
The overheating protection device is located on the
The cooling down phase will be completed in approx. 1 minute and several beeps will sound. F27 will flash in the programme/temperature display for a short while and then three horizontal bars - - - will appear. After a while F20 will appear in the display.
Proceed as follows:
Switch the appliance off and open the door.
Allow the appliance to cool down for approx. 30 minutes.
F20 will disappear from the display during this time.
Remove the overheating protection device cover cap (see arrow). Use a screwdriver or similar to press the button underneath in again.
Replace the cover cap.
The steam oven can now be used again in the normal way.
If the overheating protection device trips again, contact the Service department.
38