Problem solving guide
... steam suddenly escapes from the appliance door.
Check whether
–the safety valve has tripped. Proceed as described in "Pressure release/Safety valve".
–the pressure release has tripped. Proceed as described in "Pressure release/Safety valve".
–the rubber door seal is not fitting correctly or is damaged, e.g. cracks are visible. Fit the seal correctly or, if necessary, replace it.
... after switching on, the descaling programme symbol and 00 appear in the programme/temperature display, the symbol also appears on the left of the display, and the appliance beeps.
–The appliance needs to be descaled. Proceed as described in "Cleaning and care - Descaling".
... and E04 appear in the programme/temperature display and 0:06 appears in the time display.
The descaling process was interrupted by a power cut or by being inadvertently switched off.
The appliance will automatically carry out a rinsing programme after being switched on again to flush out any descaling fluid. This process cannot be aborted. Wait until you hear several beeps, and the symbol is flashing in the time display. Now you can either
... the following fault messages appear in the programme/temperature display.
For all fault messages:
The door can only be opened when:
-the fault message is flashing alternately with the set temperature,
-the symbol is flashing in the time display,
-the alarm has stopped.
If the display is not flashing, the appliance is still processing the fault.
F06 The temperature thermostat is faulty.
–Switch the appliance off and call the Service Department.
52
