CONNECTIONS
CONNECTING A HIGH-DEFINITION (HD) SOURCE
Connect the right (red) and left (white) audio output from the source to the right (red) and left (white) input on this unit (Audio cable not included).
Make sure you connect both audio and video from the same source to YUV IN.
Note : When connecting a DVD player to the television, the picture resolution is solely depen- dent upon the resolution supported by the DVD player attached. DVD Player resolutions vary from 480i to 1080i, and this television can support DVD players up to a maximum resolution of 1080i.
*May require a subscription for receiving HD channels, check with your cable/satellite service
provider for details.
CONNECTING AN AUDIO AMPLIFIER
This connection allows you to use an audio amplifier and external speakers.
Connect the right (red) and left (white) audio OUTPUT from this unit to the right (red) and left (white) audio INPUT on your amplifier. Refer to your amplifier’s user manual for more information.
Note :
To control the audio, both the TV and the amplifier must be turned on, and the volume of the amplifier must be set above 0, or you will not hear any sound.
If you want to hear the sound from the amplifier only. Press the Volume – button of TV to decrease the volume or press the MUTE button of remote control to turn off the sound.
11
11 | 18/01/2007, 17:01 |
