PLAYING A DISC
Repeat Playback
1.Press the REPEAT button on the remote control. The repeat modes are listed.
DVD
Repeat
All Repeat
Title Repeat
Chapter Repeat
Cancel
CD
Repeat
Disc Repeat
Track Repeat
Cancel
Note: The selections on the list vary depending on category or status of a disc.
2.Use the / buttons on the remote control to select the repeat mode. All Repeat: Repeats the entire disc.
Title Repeat: Repeats the current title.
Chapter Repeat: Repeats the current chapter.
Track Repeat: Repeats the current track.
Disc Repeat: Repeats the entire disc.
You can specify a segment to repeat. Select this and press the OK button on the remote control.
“ A B Repeat
A Point ” appears.
Perform step 1) and 2) below and skip step 3.
1)While the above display appears, press the OK button on the remote control at the start point of the section you want to repeat.
The display changes to “ A B Repeat
B Point ”.
• To cancel the setting, press the REPEAT button.
2)Press the OK button on the remote control at an end point of the section where you want to repeat. Playback returns to point A and repeats between A and B.
3.Press the OK button on the remote control. Repeat playback starts.
Notes:
•Some discs may not permit repeat playback operation.
•
•The
•You can cancel repeat playback by pressing the STOP button.
- 19 -