Venturer SHD7000 owner manual Pcm, Digital Out Hdmi

CUSTOMIZING THE FUNCTION SETTINGS

Bitstream:

Select this when an AV receiver or processor equipped with built-in Dolby Digital, DTS or MPEG decoder is connected to this player.

When you play a disc recorded in Dolby Digital Plus or Dolby TrueHD format, Dolby Digital sound is output. When you play a disc recorded in DTS-HD format, the sound is converted to a DTS bitstream. If the AV receiver or processor does not support DTS, select “PCM”.

PCM:

Select this when a 2ch digital stereo amplifier is connected to this player.

When you play an HD DVD or DVD recorded in Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS-HD format, sound is converted into PCM (2ch) format.

Digital Out HDMI

To select the output sound format when connecting the HDMI OUTPUT jack.

1.In STOP mode, press the SETUP button on the remote control.

2.Use the or button to select Audio, then press the OK button.

3.Use the or button to select Digital Out HDMI, then press the OK button.

4.Use the or button to select the options (Auto, PCM or Downmixed PCM), then press the OK button.

5.Press the SETUP button to exit menu.

SETUP MENU

Picture

Audio

Language

Ethernet

General

Digital Out SPDIF	PCM
Digital Out HDMI	Auto
Dynamic Range Control	Auto
Dialog Enhancement	Off

Digital Out HDMI

Auto

PCM

Downmixed PCM

Auto:

Select this when an HDMI device equipped with built-in Dolby Digital, DTS, MPEG or a linear PCM decoder is connected to this player.

When you play a disc recorded in Dolby Digital Plus or Dolby TrueHD or DTS-HD, PCM is output (core only for DTS-HD). When you play a disc recorded in Dolby Digital or DTS-HD format, digital audio signal (bitstream audio) is output. If a connected HDMI device does not support Dolby Digital, DTS or MPEG, sound is converted into linear PCM to output.

PCM:

Select this when an HDMI device that has multi channel input is connected to this player. When you play an HD DVD or DVD recorded in multi channel in Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD format, the sound is decoded and output in multi channel in linear PCM format.

Downmixed PCM:

Select this when a 2ch digital stereo AV receiver or processor is connected to this player. When you play a DVD recorded in Dolby Digital, DTS, MPEG1 or MPEG2 format, sound is converted into PCM (2ch) format to output.

Note:

Setting “Auto” or “PCM” will reduce output level of multi channel sound from the ANALOG AUDIO OUTPUT jacks and the DIGITAL AUDIO OUTPUT BITSTREAM/PCM jack if you:

-view the playback picture on an HDMI TV connected to this player.

-play an HD DVD of a certain type, recorded in linear PCM format.

In this case, the output level will be restored by setting to “Downmixed PCM”.

- 25 -