O3300 InstallGuide.book Page 16 Thursday, November 25, 1999 3:48 PM
Omni 3300 Installation Guide
Paper Roll Spindle
Figure 8 Paper Roll, Spindle, and Cover
Note: To adjust paper position, lift the small red release lever on the cradle’s right side (Figure 6, page 14) until it snaps “up.” The paper now freely moves in the paper path. When the paper is correctly positioned, lower the lever until it snaps “down.”
For paper ordering information, refer to “Accessories and Documentation‚” page 28.
Perform a Power-On Printer Test
To ensure the printer is operating correctly:
1.Turn off power to the terminal.
2.Hold down the paper feed button and turn on the terminal. The printer test starts, then stops after a few seconds. When the test begins printing, release the paper feed button.
The test printout, with printer information and repeating character strings, is about 38 centimeters (15 inches) long.
16
