CHAPTER 1: OVERVIEW
Overview
This manual provides an overview of operations for the Symmetra® LX and Extended Run Cabinet, including detailed explanations of monitoring, control, and configuration through the PowerView user interface.
Illustrations are representative. Your unit and configuration, including components and optional APC equipment, may vary from those depicted in this document. Manuals may be accessed through the APC Web site, www.apc.com.
PowerView
PowerView contains an alphanumeric display, navigation keys, status indicators, and an audible alarm.
The tables below describe the status indicators and navigation keys.
Keys and Indicators
Status Indicator | Color | Status |
|
|
|
LOAD ON | Green | The UPS is supplying power to the load and is operating in one of the |
|
| following modes: |
|
| Maintenance. |
|
|
|
ON BATT | Yellow | A mains power failure has occurred, and the battery modules are |
|
| supplying power to the load equipment. |
|
|
|
BYPASS | Yellow | Power to the load is being supplied directly by the mains power source. |
|
| The UPS is removed from the circuit. |
|
|
|
FAULT | Red | The UPS has detected an internal fault condition. An alarm message will |
|
| appear on the PowerView display. |
|
|
|
Navigation Keys | Name | Sound | Function |
|
|
|
|
| Up | Short beep | Moves the selection arrow upward. |
|
|
|
|
| Down | Short beep | Moves the selection arrow downward. |
|
|
|
|
ESC | Escape | Short beep | Exits the current screen and returns to the previous |
|
|
| screen. |
|
|
| Programming mode only: When pressed until a short |
|
|
| beep (up to one second) occurs, it exits the |
|
|
| programming mode. |
|
|
|
|
1
