SETUP
Power Supply
Power Supply The NURIT 8000 gives you the option of running the unit on battery power, or through a power adapter. The power adapter both gives power, as well as
recharges the battery.
For information on using the battery, see Connecting the Battery.
Before connecting a power supply, disconnect the power cord from the power outlet.
Connect and route all cables between the NURIT 8000, ECR, and PC before plugging the power pack cord into a wall outlet or surge protector.
WARNING Use only the VeriFone supplied AC/DC power adapter to power the NURIT 8000. The power adapter provides electrical power to the NURIT 8000 as follows:
•AC/DC adapter (safety approved) Output:
WARNING Do not plug the power pack into an outdoor outlet or operate the NURIT 8000 outdoors. Also, disconnecting power during a transaction can cause transaction data files not yet stored in memory to be lost.
NOTE
To protect against possible damage caused by lightning strikes and electrical surges, VeriFone recommends installing a power surge protector.
Connect one end of the power adapter cable to the Power port on the bottom of the terminal and the other into an electrical power outlet.
Figure 15 Power Supply Connection
NURIT 8000 INSTALLATION GUIDE | 23 |
