VeriFone 8000 manual Battery Maintenance, Removing the Battery

SETUP

Connecting the Battery

4Lift and remove the battery.

Figure 10 Removing the Battery

5Replace the battery/card compartment cover. See Figure 4.

Battery Maintenance

CAUTION

Take care when installing the battery pack. If it is installed incorrectly, it may explode. Use only a VeriFone supplied battery.

•The supplied high-performance smart Lithium-polymer battery provides 7.4 VDC at 1800 mAH (minimum) capacity.

•When fully discharged, the battery fully recharges within three hours while installed in the terminal. An 80% charge capacity is reached within one hour.

•The terminal can be connected to an AC/DC power supply indefinitely without causing damage to the battery pack.

CAUTION

When using the VeriFone-supplied AC/DC power adapter, the Lithium-polymer battery must be installed in the terminal.

•In typical use, the life span of the battery exceeds 500 charge cycles, after which, operating time decreases slowly.

•The battery pack has a self-discharge rate. It loses approximately 1% of its charge per day when not in use. Replace the battery pack when the charge capacity is too weak for normal operation.

•Remove the battery pack from the terminal if you do not intend to use your NURIT 8000 for an extended period of time.

WARNING

Do not break open, or separate the battery.

WARNING Do not dispose of the NURIT 8000 Lithium-polymer smart battery in a fire. LIthium-polymer batteries must be recycled or disposed of properly. Do not dispose of Lithium-polymer batteries in municipal waste sites.

NURIT 8000 INSTALLATION GUIDE 19