BULB REPLACEMENT INSTRUCTIONS
Step 1: Opening the
Lens Cover
Place the ClearWave® on its back on a large flat surface. Press down gently on the center of the lens cover. (See Figure 5). This releases the locking tabs located under the grey handles. Open the lens cover by grasping the grey handles with your hands. Remove the lens and gently place it next to the unit with the logo face up.
Step 2: Opening the
Bulb Clips
Locate the clear plastic clips across each fluorescent tube (Figure 6). Put a finger under the clear plastic clip on the outer side and pull up (See Figure 7). The clip should pop open. Repeat on other side.
7
