BULB REPLACEMENT INSTRUCTIONS
Removal
1.Unplug lamp from power source.
2.To access the bulb, remove Optix®
glare control filter by depressing the thumb tab and lifting it out.
3. Firmly hold bulb base (B) and pull bulb (C) from the socket (A) in an outward motion. (Fig. 8)
Installation
1.Unplug lamp from power source.
2. Firmly hold base (B) and push bulb
(C) into the socket (A).
3.Be sure bulb is firmly seated in the socket (see below) and snapped into the metal bulb clip (D). (Fig. 9)
4.Replace Optix® glare control filter.
YES | NO |
No | Notice |
gap | large gap |
Correctly seated bulb | Incorrectly seated bulb |
8
