Verilux VD03 manual Troubleshooting

TROUBLESHOOTING

Your Verilux® desk lamp uses advanced micro-electronics to power the revolutionary Trucolite™ bulb. These electronics are housed in a specially designed ballast located at the power plug. The LED indicator light on the ballast allows you to troubleshoot any problems with the lamp’s function. When replacing your Verilux® ballast, take care to plug in the power cord properly. The 4-pin plug was designed to fit in only one orientation (See Assembly Instructions on page 5).

Before requesting service on your Verilux® lamp, please check the following:

•Make sure all power connectors, cords, and plugs are inserted fully and securely.

•Be sure the bulb is securely seated into the socket. (See page 8).

•Unplug the lamp for a few minutes (this allows the electronics in the ballast to reset).

•Make sure there is power to the wall outlet or try another outlet.

WARNING: Do not block vents on ballast. Vents are necessary for proper function of the ballast; blocking them may cause overheating of the ballast and increase risk of fire.

9