Verizon M7100 Radio Settings (WPA-EAP)

38
Radio Settings (WPA-EAP)
The WPA-EAP offers PEAP, TLS and TTLS mode. The mode used must match the
network the M7100 is to communicate with.
The Shared Phrase must match the network the M7100 is to communicate with.
The Username must match the network the M7100 is to communicate with.
The Passwd must match the network the M7100 is to communicate with.
The Infrastructure Mode is for connecting the M7100 Handheld Terminal to a network of
access points. The Ad Hoc Mode is used for connecting the M7100 to a single access
point or a single radio card in a peer-to-peer network, such as a single laptop computer
for example.
The Power Save setting will force the radio card to turn off when not in use to save
power. If you experience connection problems, turn the Power Save feature off. Battery
life will be shortened with the Power Save feature shut off.
The Channel setting determines which channel the radio card will start to communicate
on. This should be set to the same channel as the access points.