61
The “RF Strength” function can be used to test
the RF coverage of a wireless RF local area
network. Simply put the M7100 handheld
terminal in “RF Strength” mode and walk in the
area you want to have RF coverage, and you can
quickly see areas with poor RF coverage.
Note that this
is a very bad
connection!
This unit is connected to
the Access Point with
a MAC address of:
00:02:2D:3E:AD:D8
at 5.5 Megabits per Second.
Note that this
is a very good
connection!
This unit is connected to
the Access Point with
a MAC address of:
00:40:96:58:8C:25
at 11 Megabits per Second.