Aspen Woodburning Stove

Introduction

Thank you for choosing a Vermont Castings Aspen to meet your heating needs. We’re confident you will find the Aspen to be an effective wood-burning heater incorporating modern, non-catalytic combustion technology with the classic aesthetic appeal of its Vermont Castings lineage.

The Aspen achieves high-efficiency through precisely calibrated delivery of primary and secondary air into a refrac- tory-insulated firebox. Properly operated and maintained according to the guidelines in this manual, your Aspen will provide safe, dependable, and economical heating for years to come.

The Aspen Model 1920 has been tested and is listed by Intertek Testing Services/Warnock Hersey of Middleton, Wisconsin. The test standards are ANSI/UL-1482 for the United States and ULC S627 and CAN/CSA B366.2 for Canada.

The Aspen Model 1920 is listed for burning wood fuel only. Do not burn other fuels.

The Aspen Model 1920 is approved for installation in manufactured (mobile) homes in the United States only using the optional Mobile Home Kit #1898 in accordance with the instructions in that kit and any local codes.

The Aspen Model 1920 complies with the standards set forth by the Federal Environmental Protection Agency, 40 CFR Part 60.532(b)(2), as stated on the permanent label attached to each stove.

We recommend that you hire a professional, solid-fuel stove technician to install your Aspen, or to advise you on the installation should you attempt to install it yourself. Consult the authority having local jurisdiction (such as a munici- pal building department, fire department, fire prevention bureau, etc.) before installation to determine the need for a building permit. Also, consult your insurance agent to be sure your installation complies with specific requirements that may vary locally.

In addition to directions on installation and operation, this manual includes directions on maintenance and assembly. Please read this entire manual before you install or operate your new room heater.

Save These Instructions For Future Reference.

Table of Contents

 

Specifications

3

Installation Requirements

4

Clearances

12

Assembly

15

Operation

17

Maintenance

21

Appendix - Draft Management

24

Replacement Parts

27

Warranty

31

Proposition 65 WARNING: Fuels used in gas, woodburning or oil fired appliances, and the prod- ucts of combustion of such fuels, contain chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. California Health & Safety Code Sec. 25249.6

2

30000369

Page 2
Image 2
Vermont Casting 1920 installation instructions Introduction, Table of Contents

1920 specifications

Vermont Castings has long been a beacon of quality and craftsmanship in the world of cast iron products, particularly known for its wood and gas stoves, as well as outdoor grills. Established in the mid-1970s, Vermont Castings quickly rose to prominence for their superior heating efficiency and durability, but it's important to highlight that their iconic brand rests on decades of innovation and tradition.

The Vermont Castings 1920 model is reminiscent of the vintage designs that reflect a commitment to both aesthetics and functionality. This model features a robust cast iron construction, ensuring exceptional heat retention and an impressive lifespan. Cast iron is known for its excellent ability to radiate warmth evenly, making it highly effective for heating spaces.

One of the standout features of the Vermont Castings 1920 is its efficient wood-burning abilities. Equipped with a patented catalytic combustor, this model can achieve impressive efficiency ratings, which translate to fewer emissions and lower wood consumption. This technology not only honors environmental standards but also enhances the overall user experience. The combustor maximizes the burn time, allowing users to enjoy a more extended period of warmth without the need for constant refueling.

The design of the 1920 model pays homage to classic aesthetics, featuring intricate detailing and a timeless finish that complements a variety of interior styles. It's available in multiple colors, allowing homeowners to select a look that best fits their décor. The large glass window on the front lets users enjoy the mesmerizing flames while ensuring the stove remains safe and efficient.

Ease of use is another critical characteristic of the Vermont Castings 1920. It incorporates straightforward controls for adjusting airflow, enabling users to fine-tune the burn rate and optimize heat output. Furthermore, the stove features an easy-to-clean ash pan, making maintenance a breeze.

Overall, the Vermont Castings 1920 model embodies a blend of historical craftsmanship and modern technology, providing an unparalleled heating solution with aesthetic appeal. Its enduring features and innovative attributes ensure that it remains a favorite among those seeking both functionality and style in home heating solutions. Whether in a rustic cabin or a contemporary home, the 1920 model stands out as a testament to the elegance and efficiency that Vermont Castings is known for.