Vermont Casting 1920 Negative Pressure, Conclusion, Aspen Woodburning Stove

Models: 1920

1 32
Download 32 pages 919 b
Page 26
Image 26
Negative Pressure

Aspen Woodburning Stove

Negative Pressure

Good draft also depends on a sufficient supply of air to the stove. The chimney cannot pull more air than is available. Sluggish draft can be caused by a house that is tight enough to prevent the ready flow of air to the stove, or by competition between the stove and other appliances that vent indoor air to the outside; i.e., ex- haust fans for range hoods, clothes dryers, bathroom, etc. If the chimney draws well when all such equipment is turned off (or sealed, in the case of the fireplaces and/or other stoves), you simply need to be attentive in timing the use of the other appliances. If you need to crack a nearby window or door to enable the chim- ney to pull well, you should install an outside-air intake to bring combustion air directly to the stove. Consult your Vermont Castings’ dealer regarding an adapter to attach to the stove to connect an air duct for outdoor combustion air.

Conclusion

Woodburning is more an art than a science. Art in- cludes technique and since installations, homes and fuel vary, the stove operator must also vary technique, (mostly timing), to achieve satisfying results. Over time, you will become familiar with the intricacies and nuances of your particular installation and you will be able to identify cause and effect in a variety of seasonal circumstances.

26

30000369

Page 26
Image 26
Vermont Casting 1920 installation instructions Negative Pressure, Conclusion, Aspen Woodburning Stove