Vermont Casting 2479 The Chimney Connector, Dutchwest Non-CatalyticConvection Heater, Two Weeks

Dutchwest Non-Catalytic Convection Heater

um hose inserted into each passage. Care should be taken not to damage the white fibrous material in this rear chamber. (Fig. 34)

The Chimney Connector

TWO WEEKS:

•Inspect the chimney connector and chimney. Clean if necessary.

TWO MONTHS:

•Inspect the chimney and chimney connector. Pay particular attention to the horizontal runs of chimney connector, and the elbows. Clean the system if nec- essary.

ANNUAL SPRING CLEANING:

•Disassemble the chimney connector and take it outdoors for inspection and cleaning. Replace weak sections of connector.

•Inspect the chimney for signs of deterioration. Re- pairs to a masonry chimney should be made by a professional mason. Replace damaged sections of prefabricated chimney. Your local Dutchwest dealer or a chimney sweep can help determine when re- placement is necessary.

•Thoroughly clean the chimney.

Inspect and

Vacuum Both

Rear Corners

ST876 Ash Build-Up

Fig. 34 Inspect and clean out ash accumulation on either side of the non-catalytic combustion system.

26 30002291