Vermont Castings UVS27
| Upper |
| Flange |
| ST344 |
Fig. 10 | Place upper flange behind lower edge of shroud. |
| ST345 |
Fig. 11 | Correct position of fan skirt installation. |
| ST346 |
Fig. 12 | Attach snapstat to inner shroud. |
Retaining Nut
Rheostat | Control Knob |
FK104 |
Fig. 13 Attach rheostat to bracket.
MOTOR |
| |
BLK | BLK | BLK |
|
| |
|
| SNAPSTAT |
WHT | BLK | WHT |
GRN | RHEOSTAT | |
|
| ON/OFF |
ST236
Fig. 14 Fan wiring diagram.
Install ON/OFF Switch
The switch assembly parts are found in the parts bag.
1.Attach switch assembly to left rear side of stove shroud using two screws and existing holes in shroud. (Fig. 15)
2.Run wires down back of stove, under bottom of rear shroud to valve.
3.Attach wires to valve terminals. (Fig. 16)
Switch
AssemblyExisting Holes
Screws | ST315 |
| |
Fig. 15 Attach switch assembly to rear shroud. |
|
TH |
|
TP |
|
TPTH |
|
| ST228 |
Fig. 16 Attach switch wires to valve.
20005004 | 11 |
