Log Rear F1 
LG294
Fig. 44 Place log rear onto rear log bracket.
9.Hold the log top right front to back with the narrower end toward the back. With your left hand, tilt the front left log slightly up and forward. With your right hand position the fat end of the top right log on the small shelf on the back of the front right log. Lower the two logs in place until the narrower end of the top right log comes in contact and rests on the top right side of the rear log. (Fig. 46)
10.Hold the log top left at an angle with the burned area toward the middle. Set the top left log above the front left log, matching the indentation on the bottom of the top left log with the protrusion on the front left log. Lay the back end of the top left log onto the rear log. (Fig. 46)
11.Hold the log top middle at an angle with the curve of the log going from right to left. Position the front end of the top middle log over the right front log, matching the protrusion on the right front log with the indentation on the bottom of the top middle log. Lay the back end of the middle log onto the rear log and swing the end of the log from right to left until the end of the top middle log comes in contact with the top left log. (Fig. 46)
Log Right
Log Left Front F2
Front F3
LG295
Fig. 45 Place logs left front and right front.
20006081
Chateau™
Log Top Middle F5
Log Top
Left F6
Log Top Right
F4
| LG296 |
Fig. 46 | Place middle logs. |
| LG297 |
Fig. 47 DVT44 logset.
| LG315 |
Fig. 48 | DVT38 logset. |
| 23 |
