Vermont Casting Encore NC 1450 installation instructions Ash Removal and Disposal, 30002425

Models: Encore NC 1450

1 36
Download 36 pages 10.51 Kb
Page 25
Image 25
Ash Removal and Disposal
Encore 1450 Non-Catalytic Woodburning Stove
Remove the ash pan, making sure to keep it level.
To keep the cover from sliding off and to keep ash from falling on the floor, do not tilt the ash pan for- ward.
If the stove is in operation, close the ash door while disposing of the ash.
Properly dispose of the ash in a metal container with a tight-fitting lid. Store the container outdoors away from all combustible material.
Return the ash pan to its original position in the stove, and close and latch the ash door.
Do not operate the stove with the ash door open. This will result in over-firing, and could cause dam- age to the stove, void the warranty, or even lead to a house fire.
Empty the ash pan regularly, typically every one to three days. The frequency will vary depending on how you operate your Encore: ash will accumulate faster at higher heat outputs.
Remove ash frequently and place it outdoors in a metal container with a tight-fitting lid. Place the closed container of ash on a noncombustible floor or on the ground, well away from all combustible materials, pend- ing final disposal. If the ash is disposed of by burial in soil or otherwise locally dispersed, it should be kept in the closed container until all cinders have thoroughly cooled.
You can use wood ash as a garden fertilizer.
CAUTION: Never use your household or shop vacuum cleaner to remove ash from the stove; always remove and dispose of the ash properly.
25

Ash Removal and Disposal

You should remove ash before it reaches the top of the ash pan. Check the level at least once a day. Every few days, clear any ash from the outer edges of the firebox and the cavity areas of the stove. Most of the ash will fall through the grate. Slice or stir the ash with a shovel or poker so that it falls through the grate slots.

Open

Close

ST545

Fig. 41 Turn the handle to the ash pan compartment clock- wise to open and counterclockwise to close.

IMPORTANT: Check the level of ash in the ash pan before reloading the stove. If the ash level is close to the top edge of the pan, empty the pan according to this procedure:

Open the damper.

Open the griddle or front doors, and use a shovel or poker to stir excess ash through the ash slots in the grate down into the ash pan.

Close the griddle or doors, and unlatch the ash door. It will pivot, swinging the ash pan out of the stove.

Slide the cover onto the pan, making sure it is se- curely closed. (Fig. 42)

ST566

Fig. 42 Be sure the cover is securely attached before remov- ing the ash pan.

30002425

Page 25
Image 25
Vermont Casting Encore NC 1450 installation instructions Ash Removal and Disposal, 30002425