REMOTE CONTROLS
These remote controls are available as an option only on fireplaces fitted with RN/RP gas control valves. IRFSDV24 model only.
MRC1 | On/Off Button Remote Control |
MRC2 | Temperature Control Remote |
MRC3 | Temperature Control w/digital |
| display & 24 hour program- |
| mable clock |
IMT | Wall Mounted Thermostat |
OPTIONAL GOLD TRIM KIT
A decorative gold plated window trim kit Model #VT1G00 RFSDV24TKG is available for the IRSFD24 Freestanding Fireplace.
The kit contains:
1
4Magnets
INSTALLATION PROCEDURE
1.Unpack the kit and confirm all parts are present.
2.Remove all the protective plastic wrap from the gold window trim.
3.Attach the magnets to the trim (Fig. 37).
4.Position trim against the fireplace window frame assembly. The trim will be held in place by
the magnets.
NOTE: Only the gold cleaner is allowed to be used for this window trim.
GOLD CLEANING: Clean the gold trim with a soft clean cloth slightly dampened with gold cleaner product and buff with a soft dry cloth.
DO NOT use brass polish or household cleaners as these products will damage the trim.
Gold cleaner products can be obtained from any fireplace dealer stores.
BIG RADIUS OF |
THE TRIM |
ALWAYS UP AFTER |
INSTALLING |
MAGNETS LOCATION |
Fig. 37 |
10004000 |
Irving Oil
OPTIONAL FRAME WINDOW TRIM KITS
Decorative brass window trim kits are available for the IRSFDV34 Freestanding Fireplace.
Model Style
RFSDV34TKA - Antique Brass
RFSDV34TKD - Polished Brass RFSDV34TKD - Pewter
INSTALLATION PROCEDURE
1.Unpack the kit and confirm all parts are present.
2.Remove all the protective plastic wrap from the brass components.
3.Attach the magnets to the trim (Fig. 38). (Antique Brass or Polished Brass only
4.Position trim against the fireplace window frame assembly. The trim will be held in place by
the magnets.
5.Fit the brass rings in place around any visible vent joints.
It is very important to remove all the protective wrap from the brass components before fitting them to the fireplace or venting.
BRASS CLEANING: Clean the brass trim with a soft clean cloth, slightly dampened
with lemon oil and buff with a soft dry cloth. Lemon oil may be obtained at
supermarkets or hardware stores.
DO NOT use brass polish or household cleaners as these products will damage the tirm.
Place magnets here |
Fig. 38 |
21 |
