Vermont Casting VCS5037 Attach Side Burner Lid S/B-Single Parts Required, Remove the Packing Tape

VCS4007 / VCS4017 / VCS4027 / VCS4037 / VCS5007 / VCS5017 / VCS5027 / VCS5037 Assembly

Step 9: Attach Side Burner Lid (S/B-Single)

Parts Required:

(1)Side Burner Lid (S/B-Single)

(2)#10-24 x 3/4” ( 1/4” Shank)*

*Included with the Side Burner Kit

Attach the lid marked (S/B-Single) to the Shelf Right top marked VM-S/B using two #10-24 x 3/4” ( 1/4” Shank) bolts. Align the holes at the back sides of the lid with the holes located in the shelf top and insert a bolt in each.

Note: If your unit is equipped with a side burner, please refer to the instruction sheet included with the side burner for installation instructions.

Bolts

Fig. 9

Step 10: Attach Knobs
Parts Required:
VCS4007: (5) Knobs	VCS5007: (6) Knobs
VCS4017: (5) Knobs	VCS5017: (6) Knobs
VCS4027: (5) Knobs	VCS5027: (6) Knobs
VCS4037: (5) Knobs	VCS5037: (6) Knobs

Note: Depending upon your specific model, your grill may require 5 or 6 knobs. Models VCS4007, VCS4017, VCS4027, & VCS4037 are equipped with five (5) knobs, and models VCS5007, VCS5017, VCS5027 & VCS5037 are equipped with six (6) knobs.

Fig. 10

Align the knobs on the valve stems and push inward until the knob sits snugly on the stem.

Step 11: Remove the Packing Tape

Remove the Packing Tape from: The Grease Cup

The Base Assembly (inside the grill) The Warming Rack

Note: For models VCS5007, VCS5017, VCS5027 & VCS5037, remove the Packing Tape from the front pull- out drawer.

Fig. 11

Page 5