CORRECT REPLACEMENT OF THE BURNERS
It is very important to check that the burner flame spreader “F” and the cap “C” have been correctly positioned (see figs. 3.1 and 3.2 ).
Failure to do so can cause serious problems.
In appliances with electric ignition, check that the electrode “S” (fig. 3.1) is always clean to ensure
Check that the probe “T” (fig. 3.1) next to each burner is always clean to ensure correct operation of the safety valves.
Both the probe and ignition plug must be very carefully cleaned.
Both the probe and ignition plug must be very carefully cleaned.
C |
F |
T |
S |
Fig. 3.1 |
Fig. 3.2
CORRECT POSITION OF TRIPLE RING BURNER
The triple ring burner must be correctly positioned (see fig. 3.3); the burner rib must be fitted in their housing as shown by the arrow.
The burner correctly positioned must not rotate (fig. 3.4).
Then position the cap A and the ring B (fig. 3.4 - 3.5).
Fig. 3.3
A B
Fig. 3.4
Fig. 3.5
7
