FRONT PANEL CONTROLS & SWITCHES
[REV(DW)] Key
During
Press and hold in this key for one second to activate the Dual Watch feature, described in the Operation chapter (“PRI” will be displayed on the LCD, indicating “Priority Channel” monitoring).
*Using the Menu, the “Reverse” feature may be disabled in favor of
[LOW(A/N)] Key
Press this key momentarily to select the transmitter power output level. The available power levels are:
HIGH (65W) à MID (25W) à LOW2 (10W) à LOW1 (5W)
To toggle the display between indication of the frequency and the channel’s Alpha/ Numeric label, press and hold in this key for one second while receiving on that memory channel.
[D/MR(MW)] Key
Press this key momentarily to switch the frequency control among the VFO, Memory System, and Home channel.
Press and hold in this key for one second to activate the Memory Storage mode.
DIAL Knob
This
Display
The main digits on the display may show operating frequency, memory name, or any of many parameters during Menu setup.
|
| DTMF Memory Mode |
|
| CTCSS/DCS Bell Paging | Lock Feature Active | |
CTCSS | DCS (Digital Code Squelch) | Programmable Memory Scan | |
|
|
| |
(Continuous Tone Coded Squelch System) | SKIP/Preferential Scan Channel | ||
| Repeater Shift Direction |
| Priority Channel |
| TX Indicator |
| Memory Mode |
|
|
| |
| TX Power Level |
| Frequency/Message Area |
|
| Memory Channel Number | |
| Smart Search |
| |
|
| VFO Mode | |
| Narrow Deviation |
| |
|
|
| |
| BUSY Indicator | S- and TX Power Meter Home Channel |
11 |