Vertex Standard FT-2800M [2] Automatic Repeater Shift, MHz, SET, MHz, SET, OFF, MHz, SET, DIAL, DIAL, 02 ARS

ADVANCED OPERATION

REPEATER OPERATION

[2] Automatic Repeater Shift

The ARS (Automatic Repeater Shift) feature in this transceiver allows easy and convenient repeater operation by automatically activating the repeater shift function whenever you tune to a standard repeater subband. The ARS function is preset at the factory to conform to the standards for the country to which it is exported.

The ARS function is enabled at the factory. To disable it:

1.Press and hold in the [MHz(SET)] key for one second, then rotate the DIAL knob to select “02 ARS.”

2.Press the [MHz(SET)] key, then rotate the DIAL knob to change the display to “OFF.”

3.Press and hold in the [MHz(SET)] key for one second to save your new setting and exit to normal operation.

To enable the ARS function again, select to “ON” in step 2 above.

ARS-Repeater Subbands

Version A

145.1 145.5 146.0 146.4 147.0 147.6 148.0

146.6147.4 145.6 145.8

European Version

22 FT-2800M OPERATING MANUAL